Ramstein Underground
heart and soul of our community
Login - Create Account - Help
Clean out your garage on Ramstein bookoo! Or find local garage sales on Yard Sale Search.com
PCSing? Win the lottery? Explore homes near Ramstein/KMC courtesy of Remilitary.com!

Radiators

who's talking here?

Mojo 1
Erika 2
angel2009 1
masterdag 1
daisy 2

     » send to friend     » save in my favorites

Erika --- 15 years ago -

I have no heat coming from the radiators I went to the basement and the heating system is on, what else could it be? 

Mojo --- 15 years ago -

We call our landlord for that stuff, if the radiators aren't working right and everything is set as it should be, that has always meant there was a bigger problem.

Last time, it was some small piece that regulated the hot/cold flow of the water and required a specialist to repair. 

angel2009 --- 15 years ago -

maybe you have to let out the air. there are little keys for that. you open the valve and let the air out until water comes, but be careful open the valve just a little bit or else dirty water sprays out. use a towel around it to avoid splashing the wall. Also you may have to fill the boiler with water, there is a gauge with a marking on it, if the needle is to the left of the markings it needs water. But you better let your landlord do it or show you if you haven't done it before. 

daisy --- 15 years ago -

It could be air in the radiators,if it's cold at the top and warm at the bottom then they need bleeding.Have you got the key for it Erika? 

daisy --- 15 years ago -

Thank you angel2OO9..you got there before me;) 

Erika --- 15 years ago -

I have done the water thing at our last place, we didn't have a key we have to use a tool from the hubbys tool box. I will try that and see what happends. 

masterdag --- 15 years ago -

If the radiator is warm to the touch then bleeding off air from the system is needed. If no heat/warmth is present, then you thermostat is stuck closed. You can try to turn your heat on and off multiple times to see if it frees. If your thermostat is the kind that unscrews from it base to expose a small pin, you can manually open the valve. With a pair of pliers you can gently push and turn and pull the pin until it frees. Do this gently! Don't pull the pin to hard or the pin will pull loose and you will have water everywhere. The pin should come out about 3/4 to and inch, then your valve will be open and you will have heat. 

page 1
Login to add your comments!

see more discussions about...

Terms of Service - Privacy Policy - Ice Box

Ramstein Underground