Ramstein Underground
heart and soul of our community
Login - Create Account - Help
Clean out your garage on Ramstein bookoo! Or find local garage sales on Yard Sale Search.com
PCSing? Win the lottery? Explore homes near Ramstein/KMC courtesy of Remilitary.com!

Multi-system TV's

who's talking here?

Mojo 2
Nicksdad 1
Wrenise 1
Atticus Finch 2
SexyJalepeno 1
EuroMaker 1

     » send to friend     » save in my favorites

SexyJalepeno --- 15 years ago -

I have a TV that isn't "multi-system" and was told to be able to view German TV channels (Kabel Deutchland etc) with this tv, I could purchase a converter (from ATSC/NTSC to whatever Germany uses, PAL etc). Where would I be able to buy something like this? BX? On the economy? Is it expensive? I want to avoid buying another tv. Any help would be much appreciated. Thanks!!! 

Atticus Finch --- 15 years ago -

Here

Though I did not answer your question I did provide a link which will give you an idea.

(NOTE: Hope this answer meets the standard(s) of some posters/readers. I just wanted/needed a daily "boost" with this reply!) 

Nicksdad --- 15 years ago -

I had always been under the assumption that if you use the composite (red/white/yellow RCA connector), component (red/green/blue)or HDMI inputs on the TV then NTSC/PAL doesn't really matter, but it would if you use the antenna input (one large center pin on the cable carrying both audio and video). My last TV was bought at Saturn and didn't specifically say whether it was multisystem - and I watched AFN and German sat TV as well as region 1/2 DVDs no problem. Never had a Kabel Deutschland box so no idea what they use to talk to the TV. 

EuroMaker --- 15 years ago -

@Nicksdad - You are correct. Not to mention, I don't really think anyone is using NTSC/PAL anymore now that everything has gone digital.

NTSC/PAL still exist as standards, but since most people use a digital output from their receiving device these days, it is kind of a moot point.

If anyone cares, a lot of good info on this can be found here. 

Atticus Finch --- 15 years ago -

On some of the receivers you can specify NTSC/PAL in the setup menu as well. I have one which is at least 4 years old and this option in the menu is available. (Sorry no link to my model.) 

Mojo --- 15 years ago -

If you have an older tv that is still pal/NTSC, there are a couple of good converter boxes at amazon. The ones sold at the bx will not do what you need it to, unfortunately. We learned that the hard way.

I think ours was a rainbow box or something similar. It has been awhile since we had it so I honestly can't remember, only that if you buy the $20 from the bx you will be out $20 and sti have to buy the right one. 

Wrenise --- 15 years ago -

Unfortunatly Nicksdad is incorrect.

Even with a HDMI the signal output from a European sat/dvd/blue ray is still 50hz. US model televisions only operate on the 60hz range. Being digital has nothing to do with the signal output.

I know this as fact. I use Sky Digital HD with a SAMSUNG TV and if you connect the Sky UK HD reciever it will say Check Signal Input.

This is what I am currently using to upscale the 1080i signal via HDMI. Atlona Converter

NTSC=60hz
PAL=50hz 

Mojo --- 15 years ago -

It depends on the tv. We are using hdmi with no problems on our sky box and we have no converter. The tv is relatively new, though. Our old one needed a converter box. 

page 1
Login to add your comments!

see more discussions about...

advice

Terms of Service - Privacy Policy - Ice Box

Ramstein Underground